Skip to the beginning of the images gallery

First Generation Floor Standing - Single Row - Angle

First Generation Floor Standing - Double Row - Side

First Generation Floor Standing - Single Row - Side

First Generation Lumber Adjuster Master Single

First Generation 53mm Sprung Slat Holders

First Generation 53mm Sprung Slat Holders Group

Deluxe First-Generation Single Row Floor Standing Slatted Bed Base

£310.80 £245.00 incl. VAT £204.17

Bed Base Width: 750mm, 900mm, 1200mm & Custom Widths Available
Bed Base Length: 1900mm, 2000mm & Custom Lengths Available

Deluxe First-Generation Free-Standing Slatted Bed Bases
Single Row – Ideal for One Sleeper
53mm Beech Sprung Bed Slats
20 Slats – per Row (may vary depending on Length)
Gap in Between Slats 43mm
Frame Height including Holder 90mm

Bed Legs:

Solid Beech Square or Cylinder Available
Various Height Legs including Custom Height Available

Additional Options:

Lumber Adjusters

Our Slatted Bed Bases are manufactured in-house and are Exclusive to us.

£310.80 £245.00 incl. VAT £204.17

Select Options

More Information

Please Choose the width of your Free Standing Slatted Bed Base

These Bed Bases are manufactured to order; please double check your sizes before ordering

750mm x 1900mm - Standard UK Small Single 2ft 6

750mm x 2000mm - Long Small Single 2ft 6

900mm x 1900mm - Standard UK Single 3ft

1200mm x 1900mm - Standard Small Double 4ft - Ideal for One Sleeper - Upgraded to 12mm Beech Sprung Slats and Thicker Frame + £120.00 incl. VAT £100.00

Custom Service - Width or Length

Please specify with Custom Width

Must be below 915mm width and 2000mm Length.

Would you like any Advance Features?

Eight First Generation tensions adjusters are placed on each row of slat in the lumber region. The Sleep is able to move the adjusters to make it firmer in the Lumber Region.

Lumber Adjusters + £36.00 incl. VAT £30.00

Please select your Leg

Square - Solid Beech

Cylinder - Solid Beech + £24.00 incl. VAT £20.00

Please Select your Bed Leg Height

Please add the frame height to work out the total Height

We offer a Free Cutting service if required (Bed Legs)

Please ensure you select a Larger size Bed Leg for us to cut down

£310.80 £245.00 incl. VAT £204.17

Qty

Product Details

First Generation Single Row Floor Standing Slatted Bed Base

Our First Generation Floor Standing Slatted Bed Base is Designed and Manufacture in-house by our In-house Design Team. This floor standing bed base is ideal to use as a bed or to sit within another bed frame to support the mattress. We only use the highest quality components from specialist manufacturers; ensuring our finished product is built to last.

Our First Generation Single Row Bed Base consist of

20 Quality Beech Sprung Bed Slats (53mm x 8mm) - May vary depending on the length specified
70mm by 20mm Beech Multiplex Ply frame
Single Slat Holders, which are doweled into the side rails to add strength and durability
OPTIONAL: Adjustable slat tension adjusters in the lumbar region
Available with or without Legs

Fully Assembled in 1 piece when delivered ; simply screw on the Legs (if purchased)

All Slatted Bed Bases are assembled using Furniture Connector bolts, Cross Dowels, Wooden Dowel Pins and Mini Luna Half-moon washers. This provides an extremely strong joint and can also be disassembled and reassembled if needed

Technical Information:

Width Available - We offer standard UK widths; however, we are also able to offer a custom service
Length - We offer standard UK Lengths; however, we are also able to offer a custom service
Height - Approximately 90mm (plus legs or casters)
Gap in between Slats - Approximately 43mm
Fixing for Bed Legs or Castors - M10 threaded bar required

Optional Extras

Bed Legs/ Feet

We can manufacture custom Solid Beech legs is various styles and height

Lumber Adjusters

Eight First Generation tensions adjusters are placed on each row of slat in the lumber region. The Sleep is able to move the adjusters to make it firmer in the Lumber Region.