First Generation Sprung Bed Slat Kit Double Row

Our First Generation Slatted Bed Base is Designed and Manufactured in-house by our Design Team. We only use the highest quality components from specialist manufacturers; ensuring our finished product is built to last.

Our First Generation Single Row Kit is ideal when manufacturing a new bed frame or for converting flat bed slats to sprung bed slats on an existing bed frame.  

This Double Row Sprung Bed Slat Kit is designed for two sleepers

Our First Generation Single Row Kit consist of

2 Beech Ply Multiplex Rails; Pre-Drill to except our First Generation Holders
1 Solid Beech Centre Rails; Pre-Drill to except our First Generation Holders and machined for Centre Rail Brackets
40 Quality Beech Sprung Bed Slats (53mm x 8mm)  - May vary depending on the length specified
80 Single Slat Holders, which are doweled into the side rails to add strength and durability
Pair of Metal Centre Rail Brackets with Wood Screw

Technical Information

Rail - 50mm x 20mm x 2000mm (Height including holders 63mm)

Centre Rail - 70mm x 35mm (Height including holders 71mm)

Gap in between Slats - Approximately 43mm

Optional Extras

Lumber Adjusters

Eight First Generation tensions adjusters are placed on each row of slat in the lumber region. The Sleep is able to move the adjusters to make it firmer in the Lumber Region. 

Bed Frame (Measurements)

We offer a cutting service where we are able to cut the length of the rails to your exact length 

We are also able to cut the Beech Sprung Bed Slat down 

Measure the inside edge of your size rail to the inside edge of the other side rail; minus 22mm and divide by 2

For Examples 

If inside edge of your size rail to the inside edge of the other side rail is 1500mm.

1500mm - 22mm = 1478mm

1478 / 2 = 739mm

Your slats will need to be cut down to 739mm