Deluxe First-Generation Sprung Bed Slat Kit Single Row
Rails with Integrated Doweled Holders
53mm Beech Sprung Bed Slats x 20
Gap in-between Slats 43mm
Our First Generation Slatted Bed Base is Designed and Manufacture in-house by our Design Team. We only use the highest quality components from specialist manufacturers; ensuring our finished product is built to last.
Our First Generation Single Row Kit is ideal when manufacturing a new bed frame or for converting flat bed slats to sprung bed slats on an existing bed frame.
2 Beech Ply Multiplex Rails; Pre-Drill to exect our First Generation Holders
20 Quality Beech Sprung Bed Slats (53mm x 8mm) - May vary depending on the length specified
40 Single Slat Holders, which are doweled into the side rails to add strength and durability
Rail 50mm x 20mm x 2000mm
Height of Rail Including the holder - Approximately 63mm
Gap in between Slats - Approximately 43mm
Eight First Generation tensions adjusters are placed on each row of slat in the lumber region. The Sleep is able to move the adjusters to make it firmer in the Lumber Region.
We offer a cutting service were we are able to cut the length of the rails to your exact length
We are also able to cut the slat down
Measure the inside edge of your size rail to the inside edge of the other side rail; minus 10mm
If inside edge of your size rail to the inside edge of the other side rail is 900mm. You slats will need to be cut down to 890mm