Direct from a UK Bed
Manufacturer
Require Help or Advice?
Call Us: 020 8814 8727
Specialist Bed Supplier
Trade and Public
Fourth Generation Slatted Bed Base - Single Row - Angle
Fourth Generation Slatted Bed Base - Single Row - Angle Fourth Generation Slatted Bed Base - Single Row - Straight Fourth Generation Slatted Bed Base - Single Row - Side Fourth Generation Slatted Bed Base - Suspension  Adjuster - Top Fourth Generation Slatted Bed Base - Suspension  Adjuster Side with Bolts Single Row Firmness Adjustors Master 25MM X 8MM TRIPLE POCKET FOURTH GENERATION SPRUNG BED SLAT HOLDERS

Elite Fourth-Generation Single Row Drop-In Slatted Bed Base with 45 x 25mm Beech Sprung Bed Slats

£370.80 £299.00 incl. VAT £249.17
£370.80 £299.00 incl. VAT £249.17
Select Options
£370.80 £299.00 incl. VAT £249.17

Fouth Generation Single Row Drop-In Slatted Bed Base with 45 x 25mm Beech Sprung Bed Slats

Our Fouth Generation Slatted Bed Base is Designed and Manufacture in-house by our Master Bed Makers. We only use the highest quality components from specialist manufacturers; ensuring our finished product is built to last.

The Fourth Generation Slatted Bed Base has Unique Triple Slat Holders with Suspension

This Drop-In Slatted Bed Bases are designed to sit within your bed frame and is manufacuted order at you specified width and length.

Our Single Row Slatted Bed Bases are designed for One Sleepers and are suitable for the following bed sizes:

- Small Single Beds 2ft 6 

- Single Beds 3ft

- Small Double Beds 4ft

Our Third Generation Single Row Bed Base consist of

-           45 Quality Beech Sprung Bed Slats (25mm x 8mm)  - May vary depending on the length specified
-           50mm by 20mm Beech Multiplex Ply frame
-           Triple Slat Holders with Suspension , which are doweled into the side rails using Pegs to add strength and durability
-           OPTIONAL: Adjustable slat tension adjusters in the lumbar region
-           Fully Assembled in 1 piece when delivered  

All Slatted Bed Bases are assembled using Furniture Connector bolts and Cross Dowels. This provides a extremely strong joint and can also be disassebled and reassembled if needed

Technical Information:

Width - Custom
Length - Custom (Maximum 2000mm)
Height - Approximately 85mm
Gap in between Slats  - Approximately 25mm

Optional Extras

Suspension  Adjusters

You are able to adjust the Suspenion to three different firmness to your individual preference

Bed Frame Requirements

Our Slatted Bed Bases are built to last for years. Your bed frame must have adequate support for the slatted bed base.

The slatted bed base is there to support you and the bed frame needs to support the slatted bed base i.e. the ledges, where the slatted bases rests on should be strong enough to hold your weight.

A Centre Rail is not required for a Single Row Bed Base

How to Measure

Wooden Bed Frame

Our Single Row Slatted Bed Bases are designed to sit within you wooden bed frame. You must take accurate measurements on the internal dimension of your bed frame; taking into account anything that is protruding e.g. bed legs, corner brackets and so on

We advise taking exact internal measurements and minus 3mm to 4mm to ensure our bed base fittings within your bed frame.  

Metal Bed Frames

Varies depending on the structure of Metal Bed Frame. Please email us images if you would like advise on compatibility

Other

Please note that the colour of the components may vary, for exact colours please call us.



Write Your Own Review
You're reviewing:Elite Fourth-Generation Single Row Drop-In Slatted Bed Base with 45 x 25mm Beech Sprung Bed Slats
Alternative Products