Elite Fourth-Generation Sprung Bed Slat Kit Double Row - V2
Rails & Centre Rail with Integrated Holders
Triple Pocket Suspension Slat Holders
25mm Beech Sprung Bed Slats x 90
Gap in-between Slats 15mm and 25mm
Optional:
Suspension Adjustors
Cutting Service
Our Fourth Generation Slatted Bed Base is Designed and Manufactured in-house by our Design Team. We only use the highest quality components from specialist manufacturers; ensuring our finished product is built to last.
The Fouth Generation Slatted Bed Base has Triple Pocket Suspension Slat Holders
Our Fourth Generation Double Row Kit is ideal when manufacturing a new bed frame or for converting flat bed slats to sprung bed slats on an existing bed frame.
This Double Row Sprung Bed Slat Kit is designed for two sleepers
2 Beech Ply Multiplex Rails; Pre-Drilled
1 Solid Beech Centre Rails; Pre-Drilled for Holders and machined for Centre Rail Brackets
90 Quality Beech Sprung Bed Slats (25mm x 8mm) - May vary depending on the length specified
60 Triple Pocket Suspension Slat Holders, which are doweled using Pegs into the rails to add strength and durability
Pair of Metal Centre Rail Brackets with Wood Screw
Rail - 50mm x 20mm x 2000mm (Height including holders 85mm)
Centre Rail - 70mm x 35mm (Height including holders 105mm)
Gap in between Slats - Approximately 25mm between the holders and 15mm within the Triple Holders
Suspension Adjusters
You are able to adjust the Suspenion to three different firmness to your individual preference
We offer a cutting service where we are able to cut the length of the rails to your exact length
We are also able to cut the Beech Sprung Bed Slat down
Measure the inside edge of your size rail to the inside edge of the other side rail; minus 22mm and divide by 2
For Examples
If inside edge of your size rail to the inside edge of the other side rail is 1500mm.
1500mm - 22mm = 1478mm
1478 / 2 = 739mm
Your slats will need to be cut down to 739mm