

Elite Fourth-Generation Sprung Bed Slat Kit Single Row
Elite Fourth-Generation Sprung Bed Slat Kit Single Row
Rails with Triple Pocket Suspension Slat Holders
25mm Beech Sprung Bed Slats x 45
Gap in-between Slats 15mm and 25mm
Optional:
Suspension Adjusters
Cutting Service
Our Fourth Genartion Slatted Bed Base has Triple Holders with Suspension and is Designed and Manufacture in-house by our Design Team. We only use the highest quality components from specialist manufacturers; ensuring our finished product is built to last.
Our Fourth Generation Single Row Kit is ideal when manufacturing a new bed frame or for converting flat bed slats to sprung bed slats on an existing bed frame.
2 Beech Ply Multiplex Rails; Pre-Drill to except our Triple Pocket Holders with Suspension
45 Quality Beech Sprung Bed Slats (25mm x 8mm) - May vary depending on the length specified
15 Triple Pocket Interactive Slat Holders, which are doweled into the side rails using Pegs to add strength and durability
Rail 50mm x 20mm x 2000mm
Height of Rail Including the holder - Approximately 85mm
Gap in between Slats - Approximately 25mm between the holders and 15mm within the Holders
Suspension Adjusters
You are able to adjust the Suspenion to three different firmness to your individual preference
We offer a cutting service were we are able to cut the length of the rails to your exact length
We are also able to cut the slat down
Measure the inside edge of your size rail to the inside edge of the other side rail; minus 60mm
For Examples
If inside edge of your size rail to the inside edge of the other side rail is 900mm. You slats will need to be cut down to 840mm
Elite Fourth-Generation Single Row Drop-In Slatted Bed Base with 45 x 25mm Beech Sprung Bed Slats
Elite Fourth-Generation Single Row Floor Standing Slatted Bed Base