Free UK Mainland Shipping on all Orders Over £50.00

Elite Fourth-Generation | 3 Position Firmness Control | Drop-In Slatted Bed Base| Dual Row

£509.00

Exclusive to "The Bed Slats Workshop"

Manufactured in our London Workshop

FREE Customisation (Length & Width)

Express Manufacturing (5 day, 3 day and 1 day Available)

100% Beech Timber

Sustainable Products

Estimated delivery Usually Manufactured in Ten Working Days; Express Service available

Ask a question

Fourth Generation Dual Row Drop-In Slatted Bed Base with 90 x 25mm Beech Sprung Bed Slats

Our Fourth Generation Slatted Bed Base is Designed and Manufacture in-house by our Master Bed Makers. We only use the highest quality components from specialist manufacturers; ensuring our finished product is built to last.

The Fourth Generation Slatted Bed Base has Unique Triple Slat Holders with Suspension

This Drop-In Slatted Bed Bases are designed to sit within your bed frame and is manufacuted order at you specified width and length.

Our Double Row Slatted Bed Bases are designed for Two Sleepers are suitable for the following Bed Sizes:

- Small Double Beds 4ft 

- Double Beds 4ft 6

- European Double Beds 140cm

- King Size Bed 5ft 

- European King Size Beds 160cm

- Super King Beds 6ft

- Emperor bed

Our Fouth Generation Double Row Bed Base consist of

-           90 Quality Beech Sprung Bed Slats (25mm x 8mm)  - May vary depending on the length specified
-           50mm by 20mm Beech Multiplex Ply frame
-           Triple Slat Holders with Suspension , which are doweled into the side rails using Pegs to add strength and durability
-           OPTIONAL: Adjustable slat tension adjusters in the lumbar region
-           Fully Assembled in 2 piece when delivered  

All Slatted Bed Bases are assembled using Furniture Connector bolts and Cross Dowels. This provides a extremely strong joint and can also be disassebled and reassembled if needed

Technical Information:

Width - Custom
Length - Custom (Maximum 2000mm)
Height - Approximately 85mm
Gap in between Slats  - Approximately 25mm

Optional Extras

Suspension  Adjusters

You are able to adjust the Suspenion to three different firmness to your individual preference

Bed Frame Requirements

Our Slatted Bed Bases are built to last for years. Your bed frame must have adequate support for the slatted bed base.

The slatted bed base is there to support you and the bed frame needs to support the slatted bed base i.e. the ledges, where the slatted bases rests on should be strong enough to hold your weight.

Our Double Row Slatted Bed Bases require Support on the sides and centre. Our bed base should rest on Slat support ledges that are generally screw onto the inside of you side rail. It Should also rest on a centre rail. Alternatively they are rest of cross rails; this is very common on french bed frame.

We can supply

- Bed Slat Support Legdes
- Repalcement Centre Rail Kits
- Repalcment Cross Rail Kits
- Adjustable centre rail support feet

If you feel you bed frame requires added support

How to Measure

Wooden Bed Frame

Our Single Row Slatted Bed Bases are designed to sit within you wooden bed frame. You must take accurate measurements on the internal dimension of your bed frame; taking into account anything that is protruding e.g. bed legs, corner brackets and so on

We advise taking exact internal measurements and minus 3mm to 4mm to ensure our bed base fittings within your bed frame.  

Metal Bed Frames

Varies depending on the structure of Metal Bed Frame. Please email us images if you would like advise on compatibility

Other

Please note that the colour of the components may vary, for exact colours please call us.



What make our Drop-In™ Slatted Bed Bases Unique?

We are extremely Passionate about our Products, we focus on QUALITY. Our Exclusive collection of Drop-In Slatted Bed Bases are Designed and Manufactured In-House using only premium quality components from Reputatable European Manufacturers. We are continuously liaising with our EU Suppliers and evolving with the latest technologies and trends. We are a low volume, high quality Manufacturer

  • Sustainable

    Our Beech Sprung Slats and Rails are sourced from Managed and Sustainable Forest

  • Designed and Manufactured in the UK

    All our Drop-In Slatted Bed Bases are Exclusively Manufactured in our UK workshop.

  • Custom WIDTH

    All our Drop-In Slatted Bed Bases are Width customisable to your needs FREE of charge

  • Custom LENGTH

    All our Drop-In Slatted Bed Bases are Length customisable to your needs

  • Worried about ACCESS? or ASSEMBLY?

    All our Dual Row Drop-In Slatted Bed Bases are fully assembled in our workshop and delivered in 2 Sections for Easy Access

  • Need it Quick? We offer an EXPRESS Manufacturing Service

    Our Made-to-Order Slatted Bed Bases are manufactured in approximately 10 working days. We also offer 5 day, 3 day and same day service for an additional cost if required.

  • Beech Sprung Bed Slats - illustration
    BEECH Timber

    We ONLY use Beech timber, this is undisputedly the best material in the bed industry and cannot be compared to Birch or Poplar

  • Ergonomic

    Our adaptable sprung bed slats, combined with innovative sprung slat holders, elevate the ergonomic design for enhanced comfort.

  • Airflow

    Promotes air circulation within your mattress, promoting temperature regulation and preventing moisture accumulation, thus preventing mould growth.

Something went wrong, please contact us!

Your Shopping Bag

(0)

Total:

Discounts shown at checkout

Your account enables you to

Follow your online orders, in-store repairs and access your purchase history, e-receipts

Manage your personal information

Create your personal wishlist