Manual Tilting Adjustable Drop-In Premium Second-Generation Single Row Slatted Bed Base
Bed Base Width: 750mm, 900mm or Custom below 930mm
Bed Base Length: 1900mm or 2000mm
Manual Tilting Adjustable Drop-In Premium Second-Generation Slatted Bed Bases
Single Row – Ideal for One Sleeper
38mm Beech Sprung Bed Slats
30 Slats – per Row (may vary depending on Length)
Gap in Between Slats 25mm
Frame Height including Holder 67mm
Dual 10 Position Tilting System allowing you to raise both the Head End and Foot End
Our Slatted Bed Bases are manufactured in-house and are Exclusive to us
Our Adjustable Slatted Bed Bases are Designed and Manufactured in-house in our Workshop in London, UK. They are manufactured to order to your specific size.
Our Single Row Adjustable Bed Bases are ideal for one sleeper. Therefore perfect to use within a Small Single 2ft 6 and Single 3ft Bed Frame
They have a Dual Tilting System allowing you to raise both the Head and Foot end on the Slatted Bed Base. We use a 10 Position system on both the head and foot end; allowing you to tilt the bed bases to your preferred position.
These Adjustable Slatted Bed Bases are ideal for comfort/ relaxation and can help with many medical conditions.
All our frame structures are manufactured from either Beech Ply Multiplex or Solid Beech. We only use Beech Sprung bed slats on all of our bed bases; these premium materials are undisputedly the preferred material in the industry.
All our bed bases are also connected together via Furniture Connector Bolts and Metal Cross Dowels which is the strongest and most robust connection. It far exceeds the connecting systems used by our competitors.
- Small Single Beds 2ft 6
- Single Beds 3ft
- 28 or 30 Quality Beech Sprung Bed Slats (38mm x 8mm)
- 50mm by 20mm Beech Multiplex Ply frame
- Twin Slat Holders, which are doweled into the side rails using Pegs to add strength and durability
- OPTIONAL: Adjustable slat tension adjusters in the lumbar region
- OPTIONAL: Shoulder Zone Components
- Fully Assembled in 1 piece when delivered
Our Slatted Bed Bases are built to last for years. Your bed frame must have adequate support for the slatted bed base.
The slatted bed base is there to support you and the bed frame needs to support the slatted bed base i.e. the ledges, where the slatted bases rests on should be strong enough to hold your weight.
A Centre Rail is not required for a Single Row Bed Base
Our Single Row Slatted Bed Bases are designed to sit within your wooden bed frame. You must take accurate measurements on the internal dimension of your bed frame; taking into account anything that is protruding e.g. bed legs, corner brackets and so on
We advise taking exact internal measurements and minusing 3mm to 4mm to ensure our bed base fits within your bed frame.
Varies depending on the structure of Metal Bed Frame. Please email us images if you would like advise on compatibility