3ft Premium Pine Bed Slats for Single Bed Frames - Individual

These bed slats are sold individually and are ideal for replacing individual broken slats and for adding extra support to reduce the gap in between your current slats.

We also manufacture pine bed slat sets to your exact specification. You can select your width, length and number of slats in your set.

Technical

Timber Species - Pine

We manufacture Pine Bed Slats not Spruce Bed Slats. Spruce is a cheaper alternative to Pine. Many other suppliers advertise pine slats, but are actually selling spruce slats as they are very  similar in appearance.

Width - 93mm

Depth - 20mm 

Length  - 930mm (Cutting Service Available)

If you require pine slats longer than 900mm; you should purchase the next size up and we can cut them down for you. 

Pilot Holes

10mm in from edge

Drill Diameter - 5mm

Measurements

Bed Slats tend to vary in size from bed frame to bed frame. Even though mattresses are standard sizes; the slats will vary. Bed slats will be smaller if the mattresses is the same size as the bed frame and larger if the mattresses sits within the bed frame.

PLEASE CHECK YOU MEASUREMENTS BEFORE ORDERING. 

"Measure Twice, Buy Once" :)

How to Attach

On most wooden bed frames, you would screw in each individual slats. We recommend using a Pilot Hole to stop the slat from splitting. Some wooden bed frames do not have a flat ledge for the slats to rest on, they have set spacers/blocks; you must purchase the same width slat. These do not need to be screwed in place. 

If you have a Metal Bed Frame - please see Locking Legdes

Custom Services (optional)

We can customise you individual pine bed slats on request by offering the following services

• Cutting Service - Cutting our slat to your exact length
• Pilot Holes - Pre Drill the Ends of the slats for Screws
• Ripping Service  - Cutting the width of the slat down to make it narrower
• Thicknessing Service  - Reducing the depth of the slats (to match existing slats)
• Tapering Service - Adjusting the width of the slats on the ENDS ONLY

If you have any questions or need further assistance, Please feel free to email our customer services team.

Please Note: The Pine Bed Slats are not curved and do not require bed slat holders to attach them to your bed frame. We also supply Sprung bed Slats.