Second Generation Double Row Floor Standing Slatted Bed Base

Our Second Generation Floor Standing Slatted Bed Base is Designed and Manufacture in-house by our In-house Design Team. This floor standing bed base is ideal to use as a bed or to sit within another bed frame to support the mattress. We only use the highest quality components from specialist manufacturers; ensuring our finished product is built to last.

Our Double Row bed bases are designed for two sleepers

Our Second Generation Double Row Bed Base consist of

• 60 Quality Beech Sprung Bed Slats (38mm x 8mm) - May vary depending on the length specified (30 Sprung Slats per Row)
• 70mm by 20mm Beech Multiplex Ply frame
• Twin Pocket Slat Holders, which are doweled suing Pegs into the side rails to add strength and durability
• OPTIONAL: Adjustable slat tension adjusters in the lumbar region
• Available with or without Legs

Fully Assembled in 2 piece when delivered; simply screw on the Legs (if purchased)

All Slatted Bed Bases are assembled using Furniture Connector bolts, Cross Dowels, Wooden Dowel Pins and Mini Luna Half-moon washers. This provides an extremely strong joint and can also be disassembled and reassembled if needed

Technical Information:

• Width Available - We offer standard UK widths; however, we are also able to offer a custom service
• Length - We offer standard UK Lengths; however, we are also able to offer a custom service
• Height - Approximately 95mm (plus legs or casters)
• Gap in between Slats - Approximately 25mm
• Fixing for Bed Legs or Castors - M10 threaded bar required

Optional Extras

• Bed Legs/ Feet

We can manufacture custom Solid Beech legs is various styles and height

• Optional: Adjustable slat tension in the lumbar region

Second Generation adjustable tensions adjusters are placed in the lumber region to further improve your comfort level. These are also known as “rigidity adjusters”. There are three beech sprung slats per double slat holder with two second generation sliding tension adjusters. These tension adjusters in the lumber region, allow the sleeper to manually adjust the firmness of the bed in the lumbar region to their preference. Another added benefit is that you can adjust the tension independently from your partner.

• Optional: Shoulder Zone Components

Our Special Shoulder Zone Components are a silent system, which is spring free meaning it is noise free. These components can rotate on both sides and are able to be pushed down up to 23mm including the rotation. This will dramatically improve comfort and reduce pressure in the shoulder region.

Other

Please note that the colour of the components may vary, for exact colours please call us.