Standard Sprung Bed Slat Kit Double Row - V2
Rails & Centre Rail with Integrated Suspension Holders
63mm Beech Sprung Bed Slats x 30
Gap in-between Slats 65mm
Our Standard Slatted Bed Base is Designed and Manufactured in-house by our Design Team. We only use the highest quality components from specialist manufacturers; ensuring our finished product is built to last.
Our Standard Single Row Kit is ideal when manufacturing a new bed frame or for converting flat bed slats to sprung bed slats on an existing bed frame.
This Double Row Sprung Bed Slat Kit is designed for two sleepers
2 Beech Ply Multiplex Rails; Pre-Drill
1 Solid Beech Centre Rails; Pre-Drill and machined for Centre Rail Brackets
30 Quality Beech Sprung Bed Slats (63mm x 8mm) - May vary depending on the length specified
60 Single Slat Holders, which are doweled using Pegs into the rails to add strength and durability
Pair of Metal Centre Rail Brackets with Wood Screw
Rail - 50mm x 20mm x 2000mm (Height including holders 65mm)
Centre Rail - 65mm x 42mm (Height including holders 80mm)
Gap in between Slats - Approximately 65mm
Six tensions adjusters are placed on each row of slat in the lumber region. The Sleep is able to move the adjusters to make it firmer in the Lumber Region.
We offer a cutting service where we are able to cut the length of the rails to your exact length
We are also able to cut the Beech Sprung Bed Slat down
Measure the inside edge of your size rail to the inside edge of the other side rail; minus 110mm and divide by 2
If inside edge of your size rail to the inside edge of the other side rail is 1500mm.
1500mm - 112mm = 1388mm
1478 / 2 = 694mm
Your slats will need to be cut down to 694mm