Wooden Adjustable Bed Centre Rail Support Feet with Integrated Metal U Bracket

These Adjustable centre rail feet designed and manufactured in-house and are exclusive sold by us.

This Adjustable  Foot has a metal heavy duty U Bracket on the top, ideal for securely attaching to a bed centre rail.

These adjustable Wooden feet are available in various sizes to meet all requirements. If you have a unusual size; custom sizes can be manufactured on request (please email)

The number of feet required various from centre rail to centre rail (between 1 and 3). Many bed manufacturers provide very poor quality  centre rails to save on cost.

Centre Rail Measurements

Your centre must be a minimum depth of 40mm and a maximum width of 53mm

The Centre Rail foot is supplied with

• Heavy Duty U Bracket
• M8 Furniture Connector Bolts (x 2)
• Premium M8  x 75mm Adjuster (with tilt)
• M8 Washer
• M8 Locking Nut

Measurements

You need to measure from the bottom of the centre rail to the floor

If you do not currently have a centre rail, you need to measure from the Bottom of your slats to the floor (Minus) the depth of your centre rail

Installation   3-10 minutes

Step 1 

Ensure the adjuster is at its lowest position; attach the U Bracket to your centre rail and tighten the M8 Bolts

Step 2

Use all 4 wood screws to securely attach the Plate fitting to the centre rail; then re-attach the foot

Step 3

Adjust the adjuster also it is against the floor

Step 4

Once the adjuster is firmly again the floor, you need to tighten the locking nut to lock it into position